OGi offers a large variety of bar grating products ideal in the water and wastewater markets. Products can be manufactured from aluminum, carbon or stainless steel. A variety of bar depths, mesh openings, finishes, and slip resistant surfaces are available. In addition, these products can be custom fabricated to meet specific loading or odor control requirements. OGi’s grating products can be used inside or outside the facility which include pump stations, headworks buildings, clarifiers, solids handling dewatering facilities, cake loading facilities, and membrane filtration buildings.
|OGi SG products are available in aluminum (, , , ), carbon steel () and stainless steel (). All of these products are available to meet ADA guidelines with our 11-space grating products. With 3/16” thick bearing bars the ADA standard of ½” clear between bars is achieved. For added safety our 7-space grating products go above and beyond offering ¼” clear between bearing bars. The aluminum SGI product comes standard with a ¼” width flange at the top and bottom further reducing the clear opening by 1/16”. Slip resistant surfaces can be applied to enhance the safety of these products.|
|Aluminum plank is manufactured from 6000 series aluminum alloy. This material is available in stock lengths of 20’ or 26’ and can either be fabricated by the customer, or custom fabricated according to plans and specs. OGi offers several different varieties of punch patterns such as square punched, rectangular punched, round punched, or diagonal punched. In addition, unpunched, solid plank is available for areas that may require odor control. Products can be supplied with a slip resistant surface to enhance safety in areas where water, and/or oil may be present.|
|OGi DT products are available in aluminum () and carbon steel (). All of these products are available to meet ADA guidelines with our 11-space grating products. With 3/16” thick bearing bars the ADA standard of ½” clear between bars is achieved. For added safety our 7-space grating products go above and beyond offering ¼” clear between bearing bars.|
|Electroforged (carbon and stainless):|
|Electroforged (welded) products are the traditional “standard” of bar grating. These products are available in carbon steel as well as stainless steel (304 or 316 alloy) for areas that may be subjected to corrosive materials. Various spacings and bar depths are available allowing for air, light, and drainage. Grating products can be supplied with a galvanized (carbon steel) or passivated (stainless steel) finish to increase the longevity of the product. Slip resistant surfaces can be applied to enhance the safety of the material.|